Minerals, Metals & Materials

Here are 13 sections with 29 subsections
 
Page:   zpět   1 2 3 4 5 6 7 8 9 10 next
Displaying product 21 to 40 of 185
Stainless steel rods

Stainless steel rods

We keep stock stainless steel rods, especially in the grades 1.4301, 1.4305, 1.4404 and diameters ranging from 3.0 - 150 mm, other grades and dimensions on request.
Company Profile: ALFUN a.s.
Send message Stainless steel rods
Aluminium

Aluminium

Aluminium is a key material in our production. We produce sheets, strips, plates, bars and profiles from it. We offer all of our products in dimensions according to your wishes.
Company Profile: ALFUN a.s.
Send message Aluminium
Copper sheets

Copper sheets

Copper sheets and straps Copper coils and sheets are supplied under ČSN EN 1172, 1652, 13599. Copper sheets ( coils ) of varied windings/lengths, e.g. 100 kg, 300 kg, 500 kg, and 1000 kg may be supplied as agreed from our own copper sheet winder line.
Company Profile: ALFUN a.s.
Send message Copper sheets
Aluminium sections

Aluminium sections

Aluminium sections - Ring pipes, flat rods, L-equal angle aluminium sections, L-unequal angle aluminium sections, square aluminium sections, rectangle aluminium sections, U-aluminium sections, T-aluminium sections, I-aluminium sections, Z-aluminium sections.
Company Profile: ALFUN a.s.
Send message Aluminium sections
Aluminium rods

Aluminium rods

Aluminium rods are normally supplied in EN AW 2030 T3/T4, respectively EN AW 2007 T3/T4 materials. Aluminium rods under EN 573-3, EN 573-4, EN 754-1, EN 754-2, EN 755-1, EN 755-2, and EN 755-3. Aluminium rods in normal length of 3,000 mm.
Company Profile: ALFUN a.s.
Send message Aluminium rods
Steel sheets

Steel sheets

Lengthwise and crosswise sectional steel sheets and steel galvanized sheets and strips. Sheet strips are delivered according to EN 10130. Steel sheets – all supplies are according to EN standards. Standardly supplied layer Zn 275 g / m2.
Company Profile: ALFUN a.s.
Send message Steel sheets
Aluminium sheets

Aluminium sheets

Longitudinally/transversally halved aluminium sheets/straps. The aluminium sheets/straps are supplied under EN 573 - 3, 485 - 2, 485 – 4, and PN 427305. Aluminium sheets of varied windings/lengths, e.g. 100 kg, 500 kg, and 1000 kg may be supplied as agreed from our own winder line.
Company Profile: ALFUN a.s.
Send message Aluminium sheets
Concrete reinforcement

Concrete reinforcement

The concrete reinforcement is produced from a galvanized wire, diameter 2 mm. Mesh size 50 to 50 mm. Dimensions: 2000 x 1000 mm or 3000 x 2000 mm. Produced under the German Standard DIN. Available on pallets.
Company Profile: DOPS s.r.o.
Send message Concrete reinforcement
Wire mesh

Wire mesh

We produce various types of wire mesh – galvanized wire mesh, PVC coated wire mesh, forestry wire mesh, industrial 3D Bekaert wire mesh, pipe wire mesh, hexagon breeding wire mesh, and welded wire mesh. PVC coated wire mesh – various colours. Various wire and mesh size upon order.
Company Profile: DOPS s.r.o.
Send message Wire mesh
Melting

Melting

For melting we use two medium frequency induction furnaces by the Turkish company EGES with the capacity of 4 t. Material is charged by the vibrating carriage which is shared by both furnaces. Casting weight is 0,5 - 20 kg.
Company Profile: MOTOR JIKOV Group a.s.
Send message Melting
Cast iron

Cast iron

Grey cast iron – its manufacturing and sale are among the most important activities of our company. We manufacture gray and ductile cast iron parts. The weigh of the castings falls in the interval 0,5 - 20 kg.
Company Profile: MOTOR JIKOV Group a.s.
Send message Cast iron
Ductile cast iron

Ductile cast iron

Ductile cast iron parts are, as well, very important item of the main production programme of our company. Applied technology - moulding equipment - DISAMATIC 2013 LP/PLC-B sand moulding line, vertical parting line, sand moulds dimensions: 535 x 650 x 120 - 360 mm.
Company Profile: MOTOR JIKOV Group a.s.
Send message Ductile cast iron
Foundry plants

Foundry plants

Our company has two foundry plants: The cast iron foundry produces castings form ductile and grey cast iron. The pressure die cast foundry is focused on more complicated die castings from aluminium and zinc alloys including their surface finish and, in some case, machine cutting/sizing.
Company Profile: MOTOR JIKOV Group a.s.
Send message Foundry plants
Aluminium alloys

Aluminium alloys

Aluminium alloys, unless they contain copper, resist atmospheric corrosion and acid fluids very well. Our most important customers are European producers of cars, furniture, textile, electric appliances and consumer goods.
Company Profile: MOTOR JIKOV Group a.s.
Send message Aluminium alloys
Zinc alloys

Zinc alloys

Zinc alloy parts are manufactured mostly by pressure die cast thanks to their excellent casting properties. Zinc casting ( Zn ) - in total 10 press machines, closing force 20 – 315 t, 1 x 20 t, 1 x 63 t, 2 x 80 t, 1 x 125 t, 1 x 160 t, 1 x 200 t, 2 x 280 t, 1 x 315 t.
Company Profile: MOTOR JIKOV Group a.s.
Send message Zinc alloys
Grey iron castings

Grey iron castings

Our company manufactures grey cast iron parts, which are used in various branches of industry. Grey iron castings stand out for their high quality. We export two thirds of our castings mostly to Italy and Germany.
Company Profile: MOTOR JIKOV Group a.s.
Send message Grey iron castings
Castings

Castings

We are engaged in manufacturing and sale of gray and ductile cast iron parts and making of patterns for our own use. We continue in the more than one hundred years' tradition of grey iron casting in Ceske Budejovice, iron was cast in the premises of the plant as early as in 1899.
Company Profile: MOTOR JIKOV Group a.s.
Send message Castings
Sheet processing

Sheet processing

Sheet processing by punching machines, sheet processing by bending presses, sheet processing by shanking, sheet processing by MIG/MAG welding, sheet and sheet product processing in a powder coating shop.
Company Profile: SINOP CB a.s.
Send message Sheet processing
Sale of metallurgical material

Sale of metallurgical material

Our activities also include the sale of metallurgical material. In our wholesale, you can find metallurgical material from reputable domestic and European manufacturers. Sale of a wide range of metallurgical material for retail and wholesale consumers.
Company Profile: TVARPROFIL s.r.o.
Send message Sale of metallurgical material
Stainless steel

Stainless steel

In our company, stainless steel represents the sale of stainless steel fittings, pipes, joints, valves and sight glasses (also aseptic). We are also engaged in production of piping parts made of stainless steel designed primarily for the food, chemical and pharmaceutical industries.
Company Profile: ARMAT, spol. s.r.o.
Send message Stainless steel
Page:   zpět   1 2 3 4 5 6 7 8 9 10 next  
Copyright © 2001 - 2024 Czech Trade International s.r.o. All rights reserved.