Air-Compressing and Air-Separation

Here are 2 sections
 
Page:   1
Displaying product 1 to 9 of 9
Oil-free vane vacuum pumps

Oil-free vane vacuum pumps

VRT oil-free vane vacuum pumps and DRT oil-free compressors operate on the principle of centrifugal rotary vanes in the slots of the eccentrically mounted rotor. The vanes, which guarantee self-lubricating/dry operation, are made of baked pressed graphite.
Show on map  
Company Profile: MIVALT s.r.o.
Send message Oil-free vane vacuum pumps
Compressor accessories

Compressor accessories

We will supply any compressor accessories such as air dryers with condensate outlets, filters - controllers, pneumatic tools, airbrush, manometers, hoses, quick couplings, safety valves and other compressor accessories.
Show on map  
Company Profile: Martin Kolena
Send message Compressor accessories
Compressors for industrial application

Compressors for industrial application

The compressors are designed for industrial application. Power: from 15 cu.m / h up to 2000 cu.m / h, and a pressure of 8, 10, and 13 bars. We provide full supplies of compressor stations. With the ORLÍK 2 and 3 JSK 75 compressors, a repair of units is made by replacement.
Show on map  
Company Profile: Martin Kolena
Send message Compressors for industrial application
Piston-type compressors

Piston-type compressors

We sell, repair and service the piston-type compressors ORLÍK. These piston-type compressors are suitable for industrial use from 3 – 7,5 kW. We also sell the spare parts for the piston-type compressors ORLÍK.
Show on map  
Company Profile: Martin Kolena
Send message Piston-type compressors
Screw-type compressors

Screw-type compressors

We supply the crew-type compressors, we provide assembly, guaranty and after guaranty service. Screw-type compressors are reliable and they are mainly designed for continuous operation. We offer also second hand screw-type compressors. We supply also mobile screw-type compressors.
Show on map  
Company Profile: BSJ kompresory s.r.o.
Send message Screw-type compressors
Water cooling

Water cooling

We supply the turnkey water cooling. Water cooling is used mainly for injection moulding machines. Then it is used for cooling of the furnaces or for example for hardening lines. Water cooling can be supplied in a special version. Water cooling is designed also as single-purpose.
Show on map  
Company Profile: BSJ kompresory s.r.o.
Send message Water cooling
Low-pressure ventilators

Low-pressure ventilators

We produce low-pressure ventilators of VRN, VRE, VNS, VNG, VNGH, VNGKP and VNI types. We are specialized in production of ventilators up to temperatures 120°C, 250°C and 500°C which are used in furnaces and driers. Low-pressure ventilators are produced in a non-explosive design.
Show on map  
Company Profile: VENTILÁTORY, s.r.o.
Send message Low-pressure ventilators
Furnace fans

Furnace fans

We make fans for furnaces of the following types: VRN, VRE, VNG, VNGH, VNC, VNCH, VRS, VNS, and VSS. The furnace fans are designed to transport air, gases, and vapours free of mechanical impurities and/or sticky parts that would make sediments on a fan impeller.
Show on map  
Company Profile: VENTILÁTORY, s.r.o.
Send message Furnace fans
Pneumatic tools

Pneumatic tools

We offer the following pneumatic tools: air impact wrenches, pneumatic tighteners, screw-drivers, pneumatic grinding machines, pneumatic drilling machines, impulse tighteners, modular drilling machines, torque measurement equipment and other pneumatic tools.
Show on map  
Company Profile: MAVE PLUS v.o.s.
Send message Pneumatic tools
Page:   1
Copyright © 2001 - 2019 Czech Trade International s.r.o. All rights reserved.