Minerals, Metals & Materials

Here are 13 sections with 29 subsections
 
Page:   1 2 3 4 5 6 7 8 9 next
Displaying product 1 to 20 of 173
Metal stampings

Metal stampings

We press metal stampings on the eccentric and hydraulic presses with a pressing force to 2000 kN. The maximum thickness of the starting material is up to 2.5 mm and width up to 700 mm. We have advanced knowledge in transfer and fully automated pressing.
Company Profile: KOVONA SYSTEM, a.s.
Send message Metal stampings
Stainless steel coils and sheets

Stainless steel coils and sheets

As with longitudinally and transversely cut of stainless steel sheets, we supply stainless steel coils according to EN 10088-1 and 10088-2. The usual grades and surface designs are in stock.
Company Profile: ALFUN a.s.
Send message Stainless steel coils and sheets
Stainless steel rods

Stainless steel rods

We keep stock stainless steel rods, especially in the grades 1.4301, 1.4305, 1.4404 and diameters ranging from 3.0 - 150 mm, other grades and dimensions on request.
Company Profile: ALFUN a.s.
Send message Stainless steel rods
Aluminium

Aluminium

Aluminium is a key material in our production. We produce sheets, strips, plates, bars and profiles from it. We offer all of our products in dimensions according to your wishes.
Company Profile: ALFUN a.s.
Send message Aluminium
Copper sheets

Copper sheets

Copper sheets and straps Copper coils and sheets are supplied under ČSN EN 1172, 1652, 13599. Copper sheets ( coils ) of varied windings/lengths, e.g. 100 kg, 300 kg, 500 kg, and 1000 kg may be supplied as agreed from our own copper sheet winder line.
Company Profile: ALFUN a.s.
Send message Copper sheets
Aluminium sections

Aluminium sections

Aluminium sections - Ring pipes, flat rods, L-equal angle aluminium sections, L-unequal angle aluminium sections, square aluminium sections, rectangle aluminium sections, U-aluminium sections, T-aluminium sections, I-aluminium sections, Z-aluminium sections.
Company Profile: ALFUN a.s.
Send message Aluminium sections
Aluminium rods

Aluminium rods

Aluminium rods are normally supplied in EN AW 2030 T3/T4, respectively EN AW 2007 T3/T4 materials. Aluminium rods under EN 573-3, EN 573-4, EN 754-1, EN 754-2, EN 755-1, EN 755-2, and EN 755-3. Aluminium rods in normal length of 3,000 mm.
Company Profile: ALFUN a.s.
Send message Aluminium rods
Steel sheets

Steel sheets

Lengthwise and crosswise sectional steel sheets and steel galvanized sheets and strips. Sheet strips are delivered according to EN 10130. Steel sheets – all supplies are according to EN standards. Standardly supplied layer Zn 275 g / m2.
Company Profile: ALFUN a.s.
Send message Steel sheets
Aluminium sheets

Aluminium sheets

Longitudinally/transversally halved aluminium sheets/straps. The aluminium sheets/straps are supplied under EN 573 - 3, 485 - 2, 485 – 4, and PN 427305. Aluminium sheets of varied windings/lengths, e.g. 100 kg, 500 kg, and 1000 kg may be supplied as agreed from our own winder line.
Company Profile: ALFUN a.s.
Send message Aluminium sheets
Inspection doors

Inspection doors

Inspection doors are made of plasterboard and aluminium profiles in standard sizes 200 x 200 mm to 800 x 800 mm with plasterboard 12.5 mm, 15 mm and 25 mm in width. Inspection doors can be ordered in other sizes according to customer requirements.
Company Profile: VJB PARTNER, spol. s r.o.
Send message Inspection doors
Sheet metal pressing

Sheet metal pressing

VJB Partner offers sheet metal and solid metal pressing We have eccentric presses up to 100 t available for sheet metal pressing. We perform sheet metal pressing, metal pressing, cutting, bending, and coating of sheet metals. We can process sheet metals up to 4 mm thick. Folding brake NC ( 2 m, 350KN ) available.
Company Profile: VJB PARTNER, spol. s r.o.
Send message Sheet metal pressing
Special sections

Special sections

Hot-rolled special sections made of construction, tool and stainless steel, non-ferrous metals in small and medium production series. Special sections are manufactured in a capacity of 8,000 t per year.
Company Profile: VÚHŽ a.s.
Send message Special sections
Centrifugal casts

Centrifugal casts

We produce centrifugal casts from stainless steels, special cast irons, alloyed steels and non-ferrous metals. Our typical products are cylinders, rings, tubes, and others. Castings have a maximum diameter of 1000 mm and a length of 4000 mm. The minimum hole diameter is 100 mm.
Company Profile: VÚHŽ a.s.
Send message Centrifugal casts
Feeder sleeves

Feeder sleeves

We supply products for foundries among which are exothermic and insulating feeder sleeves. In the Czech Republic and Slovakia, we are the exclusive distributor of exothermic and insulating feeder sleeves for the Italian company FAPROSID.
Company Profile: Z-MODEL, spol. s r.o.
Send message Feeder sleeves
Casting production

Casting production

Casting production - we supply castings from a range of materials according to customer demand; from aluminium alloys through copper or cast-iron alloys up to high-alloy steel. The casting production is controlled by the highest quality demands of the customership.
Company Profile: Z-MODEL, spol. s r.o.
Send message Casting production
Foundry patterns

Foundry patterns

Foundry patterns – the pattern manufacture is the first pre-requisite for the quality and success of your castings. The high-class machinery guarantees a perfect quality and precision of the foundry patterns, even in highly complex pattern units.
Company Profile: Z-MODEL, spol. s r.o.
Send message Foundry patterns
Castings for water power plants

Castings for water power plants

We make and supply castings for any industry, namely castings for water power plants - Kaplan, Pelton and/or Francis turbines. We supply castings for water power plants from a range of materials upon customer demand.
Company Profile: Z-MODEL, spol. s r.o.
Send message Castings for water power plants
Rolled rings

Rolled rings

Rolled rings are produced from 0.1 to 15 kg. They are mostly used in engineering as semi-finished products for further machining. Rolled rings are also used as semi-finished products for the production of bearings, parts of gears and flanges.
Company Profile: AXTONE s.r.o.
Send message Rolled rings
Castings production

Castings production

We produce castings in two foundries. In the first foundry is the castings production from carbon, low, medium and high-alloy steel (5 kg -18 t), manganese steel and even ductile and gray cast iron (both 5 kg - 3.5 t). In the second foundry, the castings production from ductile and gray cast iron (0.05 -6.5 kg).
Company Profile: UNEX a.s.
Send message Castings production
CNC milling

CNC milling

We carry out CNC milling with a maximum workpiece of 1220 x 800 x 500 mm. Through CNC milling, however, we are able to provide you with a 4000 x 2500 x 1500 mm workpiece size.
Company Profile: ROSTRA s.r.o.
Send message CNC milling
Page:   1 2 3 4 5 6 7 8 9 next  

Czech Companies

K o v o l a k s. r. o. Galvaning and Painting Workshops SELOS Magnetics, s.r.o. Magnets Lokotechnika s.r.o. Machinery Designing and Processing UNIHAL - Svět montovaných hal Building Metallic Materials
Copyright © 2001 - 2017 Czech Trade International s.r.o. All rights reserved.